The study of oral disease progression, in relation to the accumulation of subgingival biofilm in gingivitis and periodontitis is limited, due to either the ability to monitor plaque in vitro. When compared, optical spectroscopic techniques offer advantages over traditional destructive or biofilm staining approaches, making it a suitable alternative for the analysis and continued development of three-dimensional structures. In this work, we have developed a confocal Raman spectroscopy analysis approach towards in vitro subgingival plaque models. The main objective of this study was to develop a method for differentiating multiple oral subgingival bacterial species in planktonic and biofilm conditions, using confocal Raman microscopy. Five common subgingival bacteria (Fusobacterium nucleatum, Streptococcus mutans, Veillonella dispar, Actinomyces naeslundii and Prevotella nigrescens) were used and differentiated using a 2-way orthogonal Partial Least Square with Discriminant Analysis (O2PLS-DA) for the collected spectral data. In addition to planktonic growth, mono-species biofilms cultured using the ‘Zürich Model’ were also analyzed. The developed method was successfully used to predict planktonic and mono-species biofilm species in a cross validation setup. The results show differences in the presence and absence of chemical bands within the Raman spectra. The O2PLS-DA model was able to successfully predict 100% of all tested planktonic samples and 90% of all mono-species biofilm samples. Using this approach we have shown that Confocal Raman microscopy can analyse and predict the identity of planktonic and mono-species biofilm species, thus enabling its potential as a technique to map oral multi-species biofilm models.
Oral diseases, like gingivitis and periodontitis, are primarily caused by the accumulation of dental biofilm in the subgingival region [1,2]. Socransky et al. defined a model which explained the inter-relationship of bacterial species within an subgingival biofilm, associating specific organisms with health and disease status and placing these consortia into ‘Socransky’s complexes’ . Examples of the Socransky complexes described that prevalence of A. naeslundii in the microbiota of a healthy periodontal region, whereas the prevalence of Veillonella was more associated with the plaque present in periodontitis. Abusleme et al. also identified subgingival species in periodontal healthy patients and patients with periodontitis .
Subgingival biofilms consist of a variety of species in nature, with a different composition and abundance of species found in varied locations within the biofilm [4,5]. It has been demonstrated that microorganisms cluster within a subgingival biofilm creating specific ‘hotspots’ of high bacterial densities of certain species [6,7].
Although biofilm architecture and dynamics are well understood, there is only a limited amount of research on the composition and development of bacteria within these biofilms using spectroscopic analysis techniques.
To this day, the most common technique to display the architecture of oral biofilms is the use of fluorescence in-situ hybridization (FISH) combined with confocal laser scanning microscopy (CLSM) [8–10]. While this technique shows good resolution and characterization within a biofilm, the main limitations are the complex preparation procedure, the cost and time associated with these measurements .
Optical spectroscopy techniques nowadays offer the opportunity to identify chemical compounds in high spectral resolution , combining the power of 3D sample analysis with focused chemical composition. One of these techniques is Confocal Raman Microscopy (CRM) that utilizes a laser beam with known wavelength to analyze a sample. By measuring the scattered radiation and energy shift, Raman is able to use the acquired information of a cell’s chemical characteristics to differentiate species . This should allow for a quick, affordable and unaltered evaluation of biofilm samples with a spatial resolution of 1 μm.
Previously, CRM has been successful in the spatial resolution of biomedical environments like tissue samples or bacterial cells [14–18]. However, the acquired signals from these biomedical components are highly complex [19–21]. Therefore, differentiation based on Raman spectra has significant limitations so far [16,22–25]. To the best of our knowledge, only a few studies employed the use of CRM for environmental biofilms [26,27], but there has been very limited information in the field of oral biofilm mapping [23,28]. While surface enhanced Raman scattering (SERS) remains promising in combination with Raman microscopy [13,29,30] with the potential for higher levels of discrimination spectra, this study focuses on the analysis of chemically un-modified biofilm samples. The bacteria used for our studies were selected considering Socransky’s complexes and Abusleme’s analysis in the evaluation of subgingival biofilm species [2,3].
Because bacteria in subgingival biofilms live in the same habitat, they show similar chemical compositions. While differences in spectral fingerprint patterns of oral bacteria have been shown to be minor, they still allow differentiation between species to be made [22,31]. Given these differences it is therefore important to apply statistical models to spectral data to discriminate between species. Some of the major statistical approaches for spectral analysis are Principle Component Analysis (PCA) and multiple variations of Partial Least Square (PLS) analysis. In analytical statistics, PCA treats all variables in a database the same and uses high-dimensional points for classification but does not consider assigned classifications of variables [14,18,20,32–34]. In comparison, PLS uses these annotated classifications to maximize inter-class variance [35–38]. For that reason, PCA is normally used for simple and linear dimensionality reduction while PLS is used for classification of different sample groups.
In this research, we hypothesize that Raman spectroscopy coupled with prediction models can differentiate common oral bacteria from several different Socransky complexes which are also part of the core subgingival microbiome described by Abusleme et al (Fusobacterium nucleatum, Streptococcus mutans, Veillonella dispar, Actinomyces naeslundii and Prevotella nigrescens ) [2,3]. We have used planktonically grown microbes to develop reference spectra and then used these to interrogate the identity of both planktonically and biofilm grown organisms. Combining the model with multivariate analysis can provide the opportunity to perform biofilm mapping with a non-invasive, high resolution approach. Due to resolution limitations of 1μm of the instrument’s laser beam it may not be possible to differentiate single cells in a biofilm model. However, ‘hotspots’ of high mono-species densities of size bigger than the detection limit should allow identification of species in multi-species biofilm models in the future. The purpose of this study is to lay the groundwork for using CRM in in-vitro research for subgingival biofilm models with the analysis of different oral subgingival species and its application to artificial subgingival mono-species biofilm models.
Laboratory stocks of S.mutans (ATCC35668), A.naelsundii (ATCC12104), V.dispar (ATCC 17748), F.nucleatum (ATCC 25586) and P.nigrescens (ATCC33563) were cultured in Falcon tubes with Brain Heart Infusion Medium (Sigma-Aldrich) and incubated under anaerobic conditions (80% N2, 15% CO2, 5% H2). Each bacterial stock was diluted in fresh media, separated into three samples that were inoculated for a total of 96h.
For calibration spectra, every 24h 1,5 mL of the sample was put in Eppendorf tubes and was centrifuged at 5000rpm for 5min. After centrifugation, the supernatant was removed. Samples were then resuspended in saline (0.9% NaCl w/v) and centrifuged for an additional 5min. After centrifugation, the supernatant was removed and the bacterial pellet was spread on a borosilicate glass slide (VWR) for confocal Raman spectral analysis. For the calibration spectra, the same experimental and total of nine samples per organisms were used.
Mono-species biofilms were grown on CDC reactor glass coupons (Biosurface Technologies Corporation, Bozeman, MN, USA) in 24-well polystyrene cell culture plates (Nunc A/S, Roskilde, Denmark) using similar materials and methods of biofilm formation presented elsewhere . Wells with glass coupons were filled with a mixture of PBS at pH 7.2 (800μL), modified fluid universal medium (mFUM, 800μL) and had a final glucose concentration of 0.15% (w/v) [39,40]. Wells were inoculated with bacterial species (200 μL) and incubated anaerobically at 37°C. The medium was renewed after 17h and 41h and glass coupons were dip washed three times in saline solution (0.9% NaCl w/v) after 17h, 25h, 41h and 49h to simulate saliva flow and to remove planktonic cells from the coupons. Biofilm coupons were removed from the wells after 65h, dip-washed in a saline (0.9% NaCl w/v) solution three times, and placed on glass slides (VWR) to be dried at 50°C for 30min.
The instrument used for analysis was a ThermoFisher Scientific DXR2xi, which was equipped with a 50x long working distance objective, a 532nm filter and a 532nm laser to capture a full spectral range of 50-3500cm-1. Data acquisition was performed using a 25μm confocal pinhole setup, 5.0mW laser power, 0.25s exposure time, 100 scans, a low baseline correction and a spectral detection range from 600-1800cm-1, also referred to the ‘fingerprint region’. For every spread sample of planktonic cells four random points were chosen on the bacteria-coated glass slide for spectra to be taken, resulting in 12 samples for every time point. For the biofilm samples, five random points were selected and spectra were acquired from six coupons for every species.
Spectra were pre-corrected using low baseline correction of the ThermoFisher Scientific DXR2xi instrument. All spectral analyses and reprocessing were performed using Renishaw WiRE 5.2 (Renishaw plc, Wotton-under-Edge, UK). Each spectrum was pre-processed in the same way to reduce noise effects and spectral variations due to spectral sample collection. First, cosmic ray removal and baseline subtraction using intelligent polynomial algorithms was used to delete baseline noise from the borosilicate background. Then, noise filtering was applied taking into consideration all spectra from one organism. To additionally reduce noise, a 10 point Savitzky-Golay algorithm was applied to the spectra. All spectra were then normalized on a scale from 0 to 1.
After data acquisition and processing, the planktonic bacterial spectra data were divided into two groups–a calibration group for every species (21 samples with the selection of four random point spectra, 84 spectra) and a validation group (9 samples with the selection of 4 random point spectra, 36 spectra). Six samples with the selection of five random point spectra were chosen for the prediction of biofilm species.
The SIMCA Analysis (Umetrics, Umea, Sweden) was used for statistical proof. Two-Way Orthogonal Partial Least Square with Discriminant Analysis (O2PLS-DA) of the first derivative of the spectra was applied to differentiate species and cross-validate the model. O2PLS-DA is an analysis technique that allows differentiate systematic variation by correction their orthogonal variation in the X and Y matrices. The technique then decomposes the X and Y matrices into a joint, orthogonal and noise system. By using these systems, discriminant analysis is then able to consider and differentiate species based on their unique characteristics, discriminating the bacterial spectra into a two-dimensional score plot.
Spectra of five different bacterial strains were analyzed using CRM as described in Materials and Methods. Fig 1 shows the plots of averaged Raman spectra (a total of 84 spectra per strain). While many vibrational bands were similar in the acquired spectra, several unique bands could be assigned to each of the individual bacterial species (S1 Table) that have been assigned previously. By selecting these unique band patterns, it is possible to discriminate between the individual species. Using a reference database of Raman spectra, it was previously shown that it is possible to identify predominant chemical signature patterns in similar and distinct spectral bands [18,41,42]. The presence of proteins is indicated by Amide I and Amide III bands that are most significant at ~1250 cm-1 (Amide III) and ~1660 cm-1 (Amide I). Amino acids are identified as Phenylalanine at ~1000 cm-1 and C-N and C-C stretches (specific for proteins) are found at ~1125 cm-1. CH2 deformations at ~1450 cm-1 are the result of lipids in the cell. Our results for Streptococci species are identical with the results from Berger et al . , who previously identified components in S.mutans and S.sanguinis (Amide I at 1651 cm-1, C-H2 deformation at 1457 cm-1, C-N and C-C stretch at 1127 cm-1, phenylalanine at 1005 cm-1; Raman shift can appear due to the use of a different Raman analysis setup).
Differences in band patterns between the five selected species are found mostly in the region between 700–900 cm-1. This area is specific for nucleotides (DNA and RNA) due to ring breathing vibrations. Additionally, the area between 1500 and 1625 cm-1 shows bands that are the results of different amino acid compositions within bacterial species and thus can be used for differentiation of species.
O2PLS-DA was used as an analytical technique for the characterization of complex bacterial spectra shown in Fig 1. As described above, Spectra were acquired for five individual oral biofilm species (84 spectra each). Fig 2 shows T-score plots of different scenarios considering the two greatest variations in the datasets and plotted as X and Y.
Fig 2A shows a plot summary of the results of the O2PLS-DA of the five species. According to the O2PLS-DA algorithm, every data point shown represents a Raman spectra and also contains information of all measured species. Based on the selection of the two greatest variances, three clearly distinct clusters can be identified while one cluster shows an overlap of three species (A.naeslundii, F.nucleatum, P.nigrescens). Spectra for V.dispar can be found exclusively in the third quadrant while S.mutans are found in the fourth. Considering the third cluster, P.nigrescens is found only in the second quadrant and A.naeslundii in the first quadrant. Only F.nucleatum shows distributions in two quadrants (first and second). Since variance of samples are based on the average of a specific dataset Fig 2A considers all five species to build the average which results in insufficient separation of A.naeslundii, F.nucleatum and P.nigrescens because their calculated variances and thus Raman spectra are too similar.
In order to further analyze the data, Fig 2B was restricted to the analysis of the three most distinct species in the initial score plot. Based on the calculated variances three clearly separated clusters can be found in the same clusters and quadrants as in Fig 2A. Here, data points are spread less across the t-axis than in Fig 2B but separation of species remains clear in Fig 2A. By further focusing on the analysis of data, Fig 2C shows the O2PLS-DA T-score plot of the three species that could not be differentiated in the initial five species T-score plot. Here, the three overlapping species from Fig 2A could be more clearly discriminated because the analysis now considers the average of the spectra of A.naeslundii, F.nucleatum and P.nigrescens for the calculation of variation. This change allows the separation of species because their two greatest variations change due to a recalculation of their average.
In order to set up an appropriate calibration dataset it is necessary to select species that show the highest degree of variance. In this work we selected A.naeslundii, V.dispar and S.mutans to set up our calibration dataset.
In a second step, species predictions of known samples were made. The acquired spectra from Fig 2B for planktonically grown microbes, were used to create calibration datasets for every individual species. This dataset was then used for prediction of mono-species planktonic and biofilm spectra using cross validation with the O2PLS-DA model. As a result of this prediction, spectra were associated to one of the three strains based on their similarities of spectral patterns to the calibration set. Two sets of predictive analysis were carried out using this training data set: 1. predict the identity of planktonically grown organisms and 2. predict the identity of biofilm grown organisms.
Fig 3 shows the score plot for planktonic cell spectra for three species when analyzed with O2PLS-DA. The distribution in each of the quadrants is the same as the calibration spectra but the spectra are more spread in the score plot. After the spectra were collected for prediction, they were compared to the model that has been set up with calibration spectra (Fig 2B) for cross validation. Table 1 shows the comparison of predicting planktonic cells using the O2PLS-DA model. The diagonal, bold values show the spectra that agree with the calibration spectra while the other values represent the errors of classification. Here, none of the spectra we misclassified by the model which results in a prediction accuracy of 100% for a total of 36 spectra for each strain.
Fig 4 shows the score plot for mono-species biofilm cell spectra for three species when analyzed with O2PLS-DA. The distribution into quadrants is the same as for the calibration spectra. In Fig 4, the V .dispar cluster was distributed between the second and third quadrant. In comparison to the O2PLS-DA plot from the planktonic spectra, clusters are more defined here and closer together. For the prediction of species, spectra were also compared to the model that has been set up with calibration spectra (Fig 2B) for cross validation of the model. Table 2 shows the comparison of predicting mono-species biofilm cells using the O2PLS-DA model. While using the training set of data enabled the correct identification of more than 76% if S.mutans, more than 90% of V.dispar and 100% of A.naeslundii, the approach seems less sensitive from a prediction point of view.
In this study we developed CRM methods, including data analysis tools to identify individual bacterial species in mono-species biofilm models. Due to their similar genetic and metabolic characteristics, the chemical composition in a bacterial cell between the tested subgingival oral bacteria showed limited but unique differences in their Raman-spectra. However, using O2PLS-DA we were able to distinguish several species. Similar results were obtained for Uncaria species in a different application as described in Feng et al .  when O2PLS-DA was applied. We were able to identify S.mutans and V.dispar and A.naeslundii grown in suspension and in mono-species biofilms after establishing a calibration set of spectra generated from planktonically grown cells, both in cells derived from planktonic cells and from biofilms . The three species examined were found to coincide within the different complex groups described by Socransky, indicating significant chemotypic differences between these species. P.nigrescens and F.nucleatum, on the other hand, can be found within the same Socransky complex, indicating a close relationship, and consequently show substantial overlap in Raman spectra.
When performing O2PLS-DA with three selected species from three different Socransky complexes, it was possible to reliably identify spectral differences enabling species differentiation. Additionally, A.naeslundii, S.mutans and V.dispar could already be distinguished within the pool of five species. Thus, these three species were chosen for prediction of planktonic and mono-species biofilm cells.
Comparing the prediction score plots for both, planktonic and biofilm spectra, we observed that the clusters generated from planktonic cells is more spread out while the cluster for biofilm spectra remains compact with little distribution in the plot. This could be the result of bigger variance in the planktonic cells, resulting in a higher variance in signals between spectra, which broadens the cluster. Biofilm spectra on the other hand show less variance, indicating that the collected biofilm cells have more uniform appearance in Raman spectra.
Nevertheless, we could predict the species A.naeslundii, S.mutans and V.dispar with an accuracy of 100% if grown planktonically. For biofilm cells we achieved an accuracy of 90%. Because biofilm cells show changes in spectra if compared to planktonic cells (see S1 Fig), prediction of biofilm cells using data from planktonic cells for calibration might be problematic. This might be the reason for increased misclassification of biofilm cells, indicating the need for a biofilm based dataset for calibration. The change in Raman signal for biofilm cells is most likely the result of a change in metabolism when transitioning from a planktonic to a biofilm state .
Even though a total accuracy of 90% for biofilm cells was achieved, especially S.mutans shows low predictions accuracy (76.7%) compared to A.naeslundii (100%) and V.dispar (93.3%). S.mutans is known to be a key contributor in the production of exopolysaccharides (EPS) while A.naeslundii and V.dispar are lacking the ability to form EPS when grown as mono-species biofilms. Hence, low prediction accuracy can be the result of spectral interferences from EPS in S.mutans biofilm and needs to be considered in future experiments [44–46].
One of the most significant changes in the spectra is the absence of the 1525 cm-1 band in S.mutans representing increased amounts of polypeptides in planktonic cells. Due to the absence of this specific band, differences between V.dispar and S.mutans become much smaller which leads to several misclassifications of these biofilm spectra. For future experiments, it may be necessary to consider using biofilm spectra for the calibration O2PLS-DA model because of the change of band signal between planktonic and biofilm spectra.
High similarities in Raman spectra can be observed for species within the same Socransky complexes. Additionally, using CRM with higher resolution might improve this limitation in future experiments.
With this work, we tried to lay the groundwork whether differentiation of subgingival bacteria was possible using CRM and to determine if this technique can be applied for 3D biofilm modelling in the future. We were able to demonstrate that it is possible to differentiate oral bacterial species based on their Raman spectra using an O2PLS-DA model. It was possible to predict 100% of planktonic cells and 90% of biofilm cells from three species of three Socransky clusters. This indicates the possibility to differentiate bacterial clusters with different prevalence in orals diseases like periodontitis and gingivitis. In future research, it will be pivotal to apply this model not only to mono-species subgingival biofilm models but also to assess multi-species biofilm models. As part of this this development it will be necessary to evaluate the limitations of the technique and how this method behaves in saliva based biofilm models. While it may not be possible to differentiate all species present, species with higher abundances may be differentiated in a 3D structure successfully.
While the specific experiments showed the discrimination of planktonic bacteria and the prediction of mono-species biofilms, the method presented can be applied to build a spectral Raman library of subgingival bacteria. This can make it easier to assess and determine spatial distribution of artificial multi-species biofilm models in the future. For the analysis of mono-species biofilm models the established method was able to predict species successfully. However, in a multi-species setup it is necessary to validate and evaluate results from CRM with other methods like quantitative polymer chain reaction or CLSM. Due to the nature of sample preparation for CLSM and the increased fluorescent signal it will be essential to use coherent anti-stokes Raman scattering to omit the signal from FISH in the spectral analysis.
In the present study, confocal Raman microscopy coupled with two-way orthogonal Partial Least Square with Discriminant Analysis was applied to 1) discriminate between three oral bacterial species and 2) to develop a prediction model to successfully predict species planktonic cells and cells in a mono-species biofilm model. It was possible to identify 100% of planktonic spectra and 90% of mono-species biofilm spectra correctly. Future work will include the application of the model to the discrimination of oral bacteria in a multi-species biofilm. The developed method should allow spatial prediction of species using the fingerprint region (600-1800cm-1) of Raman spectra. It is pertinent to note that in order to perform special predictions (in two or three dimensions) it is necessary to combine batch spectra processing with the developed multivariate analysis technique in a workflow to use multivariate analysis for multi-species biofilm imaging.